Port abutment kit Korean implants Inno, MegaGen (AnyOne), NeoBiotech, Osstem, Dentium

R3810,R3870, R3880, R3890,R3840, R3820, R3860, R3850, R3830 OSSTEM

M: H1, H2, H3, H4, H5, H6, H7, H8

R: H1, H2, H3, H4, H5, H6, H7, H8

Removable dentures supported by Port abutments

(It is not recommended to use Port abutments if the divergence between the axes of the implants is more than 40)

The impression is taken at the level of the abutment

Possibility of compensating for the divergence between the axes of two implants within 40

Possibility of using a small number of implants to make a removable complete denture

Wide selection of inserts with different retention strengths

Strong and compact abutment (1.5 mm)

Golden color of the coating helps to achieve an aesthetic result

Material: Ti-6Al-4V

Use a special key to fix the abutment (code: TWLDLK/TWLDLSK)

Recommended torque: mini/standard - 30 Ncm

Indications for use: conditionally removable prosthetic structures on implants in the upper and/or lower jaw.

It is best used in cases of severe resorption of jaw bone tissue, when it is difficult to install a permanent restoration on implants, as well as in cases where a complete removable denture is poorly retained and there is no stability. This system includes an abutment locator, a restoration cap and a replaceable protruding part with different degrees of retention.

Advantages of its use:

The ability to ensure the stability of the connection of a complete restoration with retention against the background of a double retention structure.

The ability to replace protruding parts with different degrees of retention.

The presence of excellent retention allows it to be used in cases of bone resorption of the alveolar ridge.

Possibility of compensating for axis and position shifts up to 40º (standard with two implants).

Extended indications for small vertical dimension.

Due to the fact that the diameter of the Locator abutment is 3.7 mm, it is convenient to use a thin gum former during prosthetics. The implant and abutment are connected using a non-hexagonal type of connection, and the impression should be made from the level of the abutment.